Mörk

1-Week Chevy C10 Build Part 6: Finnegan's Garage Ep.137 

Prenumerera
visningar 281tn
98% 13 000 150

I gotta apologize for the late upload but at the end of the build we simply put our heads down and wrenched rather than working on filming, editing and uploading videos. However, we are back home from our trip to North Carolina and ready to show you all what went down. This video is about the last 24 hours of the C10 build and the road trip to Jimmy Bullard's MRC Fabrication shop in Kernersville, North Carolina. In a nutshell, David Newbern, Mike Cotten, Andrew Calkins, and Colin Sebern did not sleep when it came time to finish up the C10. And yet, we still came up a little bit short.

Thanks to the good folks at Wirecare.com for sponsoring this series of videos and sending all of the wiring and sleeve material to get my truck running again.

Want more info on the Gates Powergrip shrink clamps? go here:
www.wirecare.com/category/hea...

Want the new Finnegan Speed and Marine Chevy C10 shirt? Go here:
www.fsmgarage.com/products/th...

Thanks for watching! With any luck, we'll have the next C10 video uploaded on Sunday.

-Finnegan

Publicerades den

 

17 mar 2021

Dela:

Videowebbadress:

Ladda ner:

Läser in.....

Lägg till i:

Lägg till i
Titta senare
Kommentarer 560   
Shawns Derby den
Shawns Derby den 20 dagar sedan
What episode is it that shows the fuel line ensemble I'm trying to find it so my buddy can see how to put the same system together
grunt11b s
grunt11b s Månad sedan
Wanna come help me finish my 82 mustang?
Eli Long
Eli Long Månad sedan
That wagon rips!!
Neil Rosh
Neil Rosh Månad sedan
Why so many bends in structural tube?
David Fruits
David Fruits Månad sedan
1967 C-10 best daily driver.. you should remove all the race stuff and honor a survivor like that. Build up a 1961-66 for a hot Rod truck.. not many 67’s left in as good a shape as yours.. (just sayin) it’s your truck so I should mind my business but I think it. Should be road worthy nor drag worthy. LOVE YOUR SHOW FOR SURE !!!!!!!!!
David Fruits
David Fruits Månad sedan
COTTON CAN BE TRUSTED AND HES FUNNY AS ALL GET OUT. You have to be of a certain mindset to enjoy his humor.. FUNNY GUY FOR REALZ !!!!!!!!!!
David Fruits
David Fruits Månad sedan
BROTHER FINN AND NEWBERN AND COTTON, MY FAV TRUCK IS A 67 Short Bed C-10 I FOUND OUT A FEE MONTHS AGO IT ALSO IS CHIP FOOSE FAV DAILY DRIVER. HE BUILT A DAILY DRIVER THAT IS EXACTLY LIKE FACTORY EXCEPT MOTOR, FRONT SUSPENSION AND BRAKES THE REST IS SAME AS CHEVROLET MADE IT NEW. I BOUGHT ONE IN 1988 AN OKLAHOMA TRUCK WITH ZERO RUST ANS NO DRIVETRAIN FOR $275 AT A GARAGE SALE WITH NO TITLE. Then after I had a 400 small block built, a 350 turbo transmission TJE wife Left me and I lost it in the divorce SO EVERY 67 Short bed I see is bittersweet BUT I WOULD LOVE TO HAVE ONE IN ANY SHAPE. I’d trade my rust free 86. Square body for one in a heartbeat even if it didn’t run. LOVE YOUR SHOW MY FRIEND. Ps: your doing more for America than the idiot Biden. Not only are you making America Fast Again
Sid Mail
Sid Mail 2 månader sedan
you should hold the camera a little closer to everyone's face.
douglas hus-tu-ees Nichol
douglas hus-tu-ees Nichol 2 månader sedan
nice truck man ....
david gough
david gough 3 månader sedan
I cannot believe you sat in the truck going down the road in the trailer... LOL
T Nelson
T Nelson 3 månader sedan
I can't even begin to count the amount of times I've had to crawl and wedge myself into somewhere to TIG and have a helper run the peddle for me. Nice work!
Scott Boyer
Scott Boyer 3 månader sedan
I'm kind of bummed I didn't get to see the finished bottom radiator hose.
OMEGAVONDOOM
OMEGAVONDOOM 3 månader sedan
Blow torch and a painters tool cuts them off just don't go to deep.
DSM Guy
DSM Guy 3 månader sedan
Gosh I really want a truck like that
Corey Forshey
Corey Forshey 3 månader sedan
Bad ass!
Rooster
Rooster 4 månader sedan
Frigging love that truck
AussieZ X
AussieZ X 4 månader sedan
i just chuck away 35 years stuff in 4 days i was bad hoarder in small flat so just think how much i had, i had do by self no car or truck only small skip or would been kick out my flat i know how u feel i not young i 51 this year. i hope sound good by end video, great job all you guy's & girls done with truck looks sick.
Reubenb 1027
Reubenb 1027 4 månader sedan
That Malibu wagon is sick!!
Dallas Van Wyk
Dallas Van Wyk 4 månader sedan
Secure that bench vise you heathen 😂
Bob Mcalister
Bob Mcalister 4 månader sedan
The Guy in the Wild Cat is Buck He’s a friend of mine from Spartanburg SC. He’s a drag racing Man !!! He’s got a couple cars that run in the 4,s in the 8th.
Keith Bray
Keith Bray 4 månader sedan
Love the wheels
Driveway STAR
Driveway STAR 4 månader sedan
I havent tuned in in a while and holy shit yall really upped the production value with this. I love your garage mike!
Samuel Phippen
Samuel Phippen 4 månader sedan
Awesomeness
Rebel Kline
Rebel Kline 4 månader sedan
sound effects are on point!
Wallace MacGregor
Wallace MacGregor 4 månader sedan
When the camera just zoomed in on cotton silently shaking his head behind Finnegan 😂
David Mackieson
David Mackieson 4 månader sedan
Who uses rubber hose anymore me i do
64maxpower
64maxpower 4 månader sedan
I love your truck
Ryan Woods
Ryan Woods 4 månader sedan
Comments
d3athsson
d3athsson 4 månader sedan
love the truck man
NewWaveMarket LLC
NewWaveMarket LLC 4 månader sedan
Awesome build! It’s hard to find a c-10 project truck these days.
Quack Quack
Quack Quack 4 månader sedan
Epic build and loved the content best day at work ever 😀
Matthew Touma
Matthew Touma 4 månader sedan
What year is it? Looks like a 68
Flat4Buggy 2
Flat4Buggy 2 4 månader sedan
It's a '67.
Jim Thomas
Jim Thomas 4 månader sedan
The 50, The 55 , The 67 I got two 67's , I need a 50&55
Robert Clark
Robert Clark 4 månader sedan
Hey Fin , wheres the caddy!!
Tetronious
Tetronious 4 månader sedan
When it comes to most projects you’ll always run into issues or problems along the way. You all did a great job this past week on building the C10. Kudos to all of you what you were able to accomplish! 👍🏻
teamidris
teamidris 4 månader sedan
Noooo, so close, but still worth it for an amazing truck. Q: are you pushing your luck on the dry sump suction line? Lotus bloke said inch steel with a inlet trumpet and that is a loooong run?
Robyn Benander
Robyn Benander 4 månader sedan
I thought I had friends until I see what Finnegan's friend's do for him.
03CanadianF5
03CanadianF5 4 månader sedan
Just raising now that they're Cotten's "boop tssk" for the Wire Care logo just made this even better.
Jared Dodge
Jared Dodge 4 månader sedan
Now you know how freiburger felt when you cut the fenders on the og muscle truck lol
Deo Persad
Deo Persad 4 månader sedan
Awesome 👍🏾👍🏻 it's what it is, but taking it and finishing at another place is cool 👍🏻👍🏻🤙🏼🤙🏼
Pissing Soft People Off
Pissing Soft People Off 4 månader sedan
Me and my daughter were talking about equality in the workplace for men and women, I completely agreed with her. I told her woman should be able to have the same jobs and make the same money... as long as the house is clean and dinners on the table by 5.
Gregory Peet
Gregory Peet 4 månader sedan
can't help it, i'm bopping my head and tapping my foot to the music... we've gotta get some links to the "Finnegan's Garage" Soundtrack, who are these bands? If they're local guys to you, help them out getting started with posting and gainin' rep, still worth getting links to listen if they're not..
Gregory Peet
Gregory Peet 4 månader sedan
I think this episode has the most spoken works by Andrew than any other this week, maybe all-time...
TheRoulette77
TheRoulette77 4 månader sedan
worlds lightest radiator connector fitting needs some speed holes
hounddog2952
hounddog2952 4 månader sedan
👏👏👏
Wind of change
Wind of change 4 månader sedan
I mean its crazy trying to finish a whole truck in a week.
TurboDieselDan
TurboDieselDan 4 månader sedan
23:03 Dave is right. The LT1 5.7L 350 cid V8 came standard on all wagons.
James Mills
James Mills 4 månader sedan
Trucks gonna come back on a trailer
W J
W J 4 månader sedan
Where's your Cadillac?
ken reukauf
ken reukauf 4 månader sedan
I think the white board should go floor to ceiling 360. It would looking like "Beautiful Mind" in there:)
ken reukauf
ken reukauf 4 månader sedan
also, I was at an IBM convention place in NJ where the white boards would also hold magnets (floor to ceiling).
tetepeb
tetepeb 4 månader sedan
The cage and the tank in the back ruins the look of the car in my opinion...
K
K 4 månader sedan
What color are you considering for your truck. Black would look evil. It’s personally my choice these days. I’m 65 retired and finally free from the tech industry. 😀🥸😎
R N.
R N. 4 månader sedan
what purpose did you build truck for? cage meets no rulles?
George fahrman
George fahrman 4 månader sedan
Wire care!
Backyard Body and Paint
Backyard Body and Paint 4 månader sedan
67 was my favorite year of this gen, can't wait to see it finished. I have a 69 getting ready to roll into the shop for a restoration.
Classic Stang brn
Classic Stang brn 4 månader sedan
I think you guys do that on purpose, short deadlines, start 3 days earlier, but what fun would that be.
Gonzo 59
Gonzo 59 4 månader sedan
I BET $1.00 THE CLAMP BLOWS SOONER THAN THEY THINK
Thomas Williams
Thomas Williams 4 månader sedan
Glad to see you haven’t lost your mini/ sport truck ways.
anthony devita
anthony devita 4 månader sedan
Amazing work. Will be worth the wait to see it 100% complete. I don’t know anything about this, but assumed the rear stiffening tubes would have to be larger diameter.
dopesquatch
dopesquatch 4 månader sedan
So i was headed from myrtle beach to Charleston wv on back roads q fee days ago and i was seeing tons of cool nice old cars hot rods i wonder if it was this i drove past a place called sonnys in a small town in sc or nc idk
Valhalla Motorsports
Valhalla Motorsports 4 månader sedan
Please fix the dry sump plumbing before you kill your engine. The lower tube on the tank should not run up hill to the roll bar down tube like it is in the video. Your making the effective height of the tank only the difference from the top of the hose to the top of the tank the hose should never be higher than the bottom of the tank. It will probably draw oil from suction but ideally you’d want it gravity feed at all times.
john szwarc
john szwarc 4 månader sedan
you guys are awesome love the show thought I would show you my mid engine 454 c10 street legal just click on the little black c10 on the left there and check it out something you can relate to take it easy guys
Mad Mat
Mad Mat 4 månader sedan
Man that pick up is going to be sweet when it's finished. Can't wait to hear it sing.
N. Tromb
N. Tromb 4 månader sedan
I’ll give that an A+ for affort(effort) and a T for teamwork!!!!
Mango McPoo
Mango McPoo 4 månader sedan
Finnegan's Parkinsons head wobble is getting worse every year yo
zach willson
zach willson 4 månader sedan
Love it boys
aplusandy2011
aplusandy2011 4 månader sedan
@Finnegan's Garage you can come clean my shop next. I have beer! 🤣🤣🤣
gene lappe
gene lappe 4 månader sedan
Eagle was flying lol
jnzkngs
jnzkngs 4 månader sedan
7:00 Cotten is THE MAN!!
Jacob Game play
Jacob Game play 4 månader sedan
Can you do a review on rust oleum turbo paint cans and one of you vehicles or a cheap one or some body part from a vehicles
Gallery Tech
Gallery Tech 4 månader sedan
1-long week
Sean Jones
Sean Jones 4 månader sedan
"That's a genius, you're not" Best.line.ever.
J.J. Clingman
J.J. Clingman 4 månader sedan
Fennigan I’m glad to ALMOST see that you got the old truck done!! One of my most favorite body style trucks out there the 1967-1972!! I have always had one even before I could even drive back in 1995!! I do have a 1969 Chevy 1Ton 4x4 that I have been working on for the past 20 years!! Last year I finally finished my 421 sbc build my self I have it in my truck but I am definitely have trouble finding someone that can build me a set of headers that will fit that body style & the AFR aluminum heads that also have the angled plugs!! Finnegan any help would definitely be much appreciated!! I don’t have a tig welder or I would build a set my self!! I did put the motor on a engine dyno before installing in the truck!! It almost hit 700 hp & the torque was just as amazing!! It’s no LS motor but I think it should be just plenty for me!! Thanks Finnegan & I’d love to hear from you!! Oh if this does help any I am in Iowa!! Awesome video again can’t weight to see it painted & all finished up!! Just out of curiosity what color are you planning on painting it??
Eric Lock
Eric Lock 4 månader sedan
Those are tube couplers...not tube adapters. Adapters adapt something...lol
David Louis
David Louis 4 månader sedan
SIMP.
Jason Rackawack
Jason Rackawack 4 månader sedan
Anyone else confused why You Tube would put up repeated ads for a transgender beauty clinic in the middle of this truck build?......are hot rodders the target demographic for that sort of thing and I was just unaware?😬
r1lark
r1lark 4 månader sedan
Seriously, it's obvious that Cotton is the brains behind Finnegan's Garage AND Faster With Finnegan. Motor Trend ought to give Cotton his own show, it would be a hit. You the man, Cotton!!
Dayton Trail Riders
Dayton Trail Riders 4 månader sedan
What video editing software do you guys use? I'm trying to build my channel and think I need new software. Any help would be appreciated.
Dayton Trail Riders
Dayton Trail Riders 4 månader sedan
@Chris Read Been editing for a while just starting out with youtube monetization
Chris Read
Chris Read 4 månader sedan
@Dayton Trail Riders I would say, if you’re just starting out, use what software you can get for free. If you’re on windows ( moviemaker?) or Mac (iMovie) if you’re up for learning then resolve is a free program, but there might be a major learning curve if you’re starting out.
Dayton Trail Riders
Dayton Trail Riders 4 månader sedan
@Chris Read thanks for the reply. Im trying to build my channel and eventually open a shop for all things with wheels. Just trying to make great quality videos
Chris Read
Chris Read 4 månader sedan
Premiere Pro.
zach loveall
zach loveall 4 månader sedan
Dude, new editor is killin it!!
Tearz The Gamer
Tearz The Gamer 4 månader sedan
First things first give me my dollar 😂😂
Dan S
Dan S 4 månader sedan
A little late now but that truck is in desperate need of a Chop
MD Computing
MD Computing 4 månader sedan
Its like you built my dream right out of my head.
Devin O
Devin O 4 månader sedan
Man everyone;s on Cotton I cannot wait for the day he gets his revenge lol.
TPHVICTIMS
TPHVICTIMS 4 månader sedan
EVERYBODY KNOWS 😉
T3216 08
T3216 08 4 månader sedan
What happened to the caddy build is that not going ahead?
Jimbacca Sanders
Jimbacca Sanders 4 månader sedan
Cotton looks beat
power addict
power addict 4 månader sedan
Half a dozen ramp trucks and you use a car trailer?
Marc Martin
Marc Martin 4 månader sedan
Absolutely the best video's . Love what ya'all do!!!
Colby Cheese
Colby Cheese 4 månader sedan
You cant ever doubt the worlds oldest mini trucker
Normylife
Normylife 4 månader sedan
I just saw in my recommended section that you got a new video. I clicked on it and the titel sayes. I bought at 6 door cummins Truck. I was like. ffs again? Then oh. it was a year ago. Just wanted to say. Im really happy that you got your dream car finally running and driving. Mine is still rotting in the driveway. Wanna hear a good but old projectcar joke. Im working on it.
John Z
John Z 4 månader sedan
Re; the back part of the cage, had your fans not seen what went into getting that done NOONE would have known what it took. People not in the know will see it, think it's pretty cool BUT they'll not have a clue the engineering it took to make it happen.
John Z
John Z 4 månader sedan
Wow!! That heat shrink hose clamp is AWESUM! Where were those 'back in tha day' I needed something like that!!
jeffery miller
jeffery miller 4 månader sedan
It's a good thing you guys are working for yourself because you could never work for a shop and get so little done with 5 guys that know how to build shit
Dale Bickham
Dale Bickham 4 månader sedan
Shame this disappeared for a week
Edwin
Edwin 4 månader sedan
America's Cup soundtrack :-)
Mike Blasey
Mike Blasey 4 månader sedan
Are the connectors you have on the roll cage in the bed of the truck NHRA legal? If yes I may want to get some for my daughter's car.
Jim Baldridge
Jim Baldridge 4 månader sedan
How did Freiburger miss this one?
Buckin Bronco
Buckin Bronco 4 månader sedan
Me and my friends building my offroad truck (88 Bronco) in a two weeks getting it ready for an 3 day offroading event. It wasn't even a rolling chassis. But I did have pretty much everything I needed other than time and money. Had several days of working in the rain because it's Florida and couple all nighters. I recentered military H1 wheels myself. Swapped and regeared front and rear axles. Installed used 6" suspension, 3" body lift. Pieced together a super budget performance 351w. New fuel and brake systems. Wired the truck with 96 Bronco wiring I stripped down to bare bone so truck can use OBD2, MAF, and E4OD trans I had, used old tablet with Torque app as my gauges. Built dashboard from PVC board. Biggest scramble in my life. Got engine running 2 days before, driving 1 hour before. Of course had a million issue at the event but it did work and have fun. As you said you make the most progress when you have a date you have to reach
mrromantimothy
mrromantimothy 4 månader sedan
Nice truck finnerran,lol I mean really nice just give us a picture of that C10 towing the bass hemi..
Anthony Nareau
Anthony Nareau 4 månader sedan
man i shoulda came by to see the truck im like 20 mins from ya
Nästa
CAMPINGSEMESTER
10:05
visningar 68tn
The C10 is done!!!
19:06
visningar 3,6tn
CAMPINGSEMESTER
10:05
visningar 68tn